How to maintain lithium batteries for electric forklifts?

Of course, electric power is the main source of power, so how should forklift batteries be maintained and serviced? Below is a detailed introduction for everyone:

Maintenance precautions
1. Liquid level

Below the rated liquid level, the service life of the battery will be shortened, and too little will cause the battery to heat up and damage, so sufficient electrolyte is something we need to pay attention to regularly. Terminal posts, wires, and covers need to be regularly inspected for corrosion caused by oxidation at the battery terminals and wire connections, and for any deformation or heating of the covers.

2. Appearance

The dirt on the surface of the battery can cause leakage, so the surface of the battery should be kept clean and dry at all times.

Maintenance process
1. Add distilled water to a certain standard as required. If excessive distilled water is added to prolong the water addition interval, it will cause electrolyte overflow and cause electrical leakage.
2. The maintenance of terminal posts, wires, and covers must be carried out by professional technicians designated by the manufacturer.
3. Cleaning
If the surface of the battery is not too dirty, use a damp cloth to wipe it clean. If it is dirty, remove the battery from the car, wash it with clean water, and let it dry naturally

Just fine.

Maintenance of forklift batteries:

1. Before disconnecting the connection between the battery and charger, first check the display and records of the charger. If the charger displays an error message on the charger panel and the battery charging is not completed, the charger will interrupt the charging process when a fault occurs. At this time, contact the after-sales service personnel. Check and confirm that the charging condition is normal, record the charging time of the charger, the output capacity and average voltage of the unit at the end of charging, and then disconnect the battery from the charger.

2. Clean the dust on the surface of the battery to avoid the formation of discharge circuits on the surface of the battery, thereby shortening the discharge time of the battery. But please be careful not to rinse with water, only wipe with a clean cloth.

3. Check the connection between the battery unit and the battery power output line to ensure that the battery is well connected and the current output is stable.

4. Before connecting the battery plug to the power outlet of the forklift, check the electrolyte level of each individual cell of the battery within the specified range. If the electrolyte level is low, distilled water needs to be added within the standard range (generally requiring the electrolyte level to cover the electrode plate by 10-15mm).