Basic principles of lithium battery repair method three.

The basic principle of lithium battery repair method three:

The cycle system of lithium batteries has a service life of about 600 times. If the battery is charged more frequently, the thermal exercise of its molecular structure will gradually damage its internal molecular structure and external economic structure, and the high efficiency of storing positive charges will gradually decrease. The entire process of refrigeration is very easy to damage the original internal structure of rechargeable batteries. In the short term, it may improve the ability to charge positive charges, but long-term application may not be reasonable. Once the external economic structure inside the lithium battery is destroyed, it is unlikely to recover completely. Long term application of such methods will accelerate the consumption of mobile phones.

Main products: Polymer lithium batteries, 18650 lithium batteries, 18650 lithium batteries, high rate lithium batteries, lithium battery packs, polymer lithium batteries, high-temperature lithium batteries

The basic principle of lithium battery repair method three is to carry out deep charging and discharging on mobile phones, which is to achieve a deeper level of battery charging based on the consumption of internal electromagnetic energy. This requires the use of some non-traditional methods. Find a way to connect the phone to a 1.9V small light bulb, and the power consumption inside the lithium battery will be transmitted to the small light bulb until it is completely lit up. Mobile phones must gradually consume photoelectromagnetic energy based on lower operating voltages. Under normal circumstances, if the rated current of the phone is less than 3.6 volts after being connected, it will automatically turn on and off. After draining the battery, phones that recharge the battery can be used for a longer period of time.