Common problems in assembling polymer lithium batteries.

Common problems in assembling polymer lithium batteries.

1. Maintenance of plastic steel composite bag outer packaging box: mainly to avoid damage caused by sharp components. Therefore, polymer lithium battery manufacturers should regularly tidy up the surrounding environment of rechargeable batteries, discourage sharp components from touching or impacting lithium cells, and wear rubber gloves when taking them to avoid scratching the surface of lithium cells with nails.

2. Maintenance and upkeep of top and side edges: To avoid damage to the top and side edges and damage to the actual sealing effect, bending of the top and side edges should be discouraged; Together, the overall planning of lithium battery cells must adopt reliable insulation layer isolation methods to avoid connection short circuit faults between negative level and plastic steel composite bags.

3. Maintenance and upkeep of pole handles: Aluminum pole handles are used for the positive lead out terminals of polymer lithium battery cells, while nickel pole handles are used for the negative lead out terminals. Due to the thin handle, bending should be discouraged; During the entire production process, avoid contact between the pole handle and the plastic steel composite bag, and strictly isolate them with a throwing ring film.

4. Avoid mechanical equipment impact, such as falling, impacting, bending lithium batteries, and accidentally damaging rechargeable batteries.

5. Discourage the use of internal metal objects or wires to short-circuit and connect positive and negative.