Battsys 12 volt forklift battery using automotive-grade long-life environmentally friendly LiFePo4 batteries, equipped with high-performance BMS to manage battery charge and discharge.Lifespan up to 10 years, zero maintenance, 5-year warranty.
Forklift batteries, also known as forklift power batteries, are important energy devices that drive the operation of forklifts. Widely used in the forklift industry, it provides stable and reliable electricity to power forklifts. Common forklift battery voltages are 12 volts, 24 volts, 36 volts, 48 volts and 80 volts. In general, smaller warehouse forklifts and light material handling trucks usually use 12-volt or 24-volt batteries. Large stacker cranes and heavy-duty forklifts typically use 48-volt batteries.
Common capacities of 12V forklift batteries include 50AH, 100AH, 120AH, 135AH, 140AH, 150AH and so on.
Smaller vehicles and some specific equipment may be better suited to use 12v forklift batteries
BATTSY is the best 12v forklift battery manufacturer and producer, 80% recharge in 30 minutes, 20% recharge in 5 minutes, up to 10 years of service life, 4,000 cycle weeks +, and compact design, 50% weight reduction, greatly improving transportation space and efficiency.
5-year warranty . 3500+ cycles. Charging can last for 8 months.
Learn More
5-year warranty . 3500+ cycles. Charging can last for 8 months.
Learn More12V forklift battery has a wide range of applications, mainly: solar street lamps, electric toys, high-power flashlights, power tools, Bluetooth stereo, vacuum cleaners, electric sprayers, fishing machines, loudspeakers, LED lamps and all kinds of electronic equipment and so on.
12-volt lithium forklift batteries generally offer the following benefits：
1. Fast charging speed: Li-ion battery relies on its own chemical characteristics to meet the requirements of faster charging speed, from 10% to 100% of the charging time is only 2 hours.
2. Charge without memory: lithium battery charging without memory characteristics make the battery can be random, intermittent charging, without affecting the life of the user to facilitate the work of the coordinator.
3. Long service life: Li-FePO4 batteries have a cycle life of 4,000+ times (about 24,000 hours of operation), and in actual use, they still have more than 65% capacity after 4,000+ times of use.
4. Wide range of environments: lithium batteries have good discharge performance at high or low temperatures between -20 degrees and 60 degrees, and the discharge efficiency of lithium batteries is 80%~90% at -20 degrees.
5. Enhance operational efficiency: lithium battery fast charging mode is suitable for multi-shift operations, charging and use, eliminating the time and safety risks of battery replacement, more powerful, and can completely replace the internal combustion forklift.
6. Small size and light weight, easy to carry and use.
Forklift batteries can be either 12V or 24V depending on the type and purpose of the forklift. Forklift batteries are categorized into several different voltages 12V, 24V, 48V, 36V, 72V, 80V, which are generally rated according to the load capacity of the forklift and the power of the motor, but most of them use a single battery voltage of 2V.
The voltage of the batteries used in forklifts is not a uniform 12V. The voltage of a forklift depends on its type and configuration. Electric forklifts can have a variety of voltages, including 24V, 48V, 72V, 80V, etc. There are even some non-standard configurations that use 36V, 40V, and 96V voltages. These voltages are chosen primarily to accommodate different models and sizes of forklifts, as well as to meet specific job requirements.
No 24V forklift batteries may be used in place of 12V batteries.
Although the 24V power supply can be used on the 12V power supply, the 12V power cord cannot be used on the 24V. Because the voltage difference between the two is so large, directly using a 24V battery instead of a 12V battery may result in equipment damage. Be sure to select the proper voltage according to the design and usage requirements of the forklift.
12V batteries are one of the most common batteries. They are very simple in design and construction and are widely used.12V batteries are relatively small, so if you need to charge a car or truck battery, then this type of battery is suitable. In addition, 12V batteries are relatively inexpensive and can be purchased easily.
Unlike 12V batteries, 24V batteries are relatively bigger and hence more suitable when charging forklift batteries. 24V batteries are more efficient and charge faster than 12V batteries. On the other hand, 24V batteries may cost more to maintain in the long run.
Forklift batteries 12v and 24v are not the same. The main differences between 12v and 24v forklift batteries are voltage, size, charging speed, maintenance costs, and applicable scenarios.
Forklift batteries can be 12V, 24V, 48V, 72V, 80V depending on the type of forklift and application.
Truck batteries are 24V. The standard voltage of a truck's battery is 12V, and since trucks operate at 24V, it is usually made up of two batteries connected in series. Battery voltage is critical to the proper operation of the vehicle. Too low a voltage can make it difficult or even impossible to start the car, while too high a voltage can cause damage to the battery.
Electric forklift is a must-use equipment in the storage of goods, every day to carry a large weight of the operation, so the charge is very important for electric forklift, then the battery that carries the power has also become the most important equipment. Daily work, the use of electric forklift batteries need to pay attention to what matters.
(1) In order to ensure that the battery life, the battery should be fully charged before put into use, undercharged batteries can not be used.
(2) Avoid overcharging and overdischarging the battery as much as possible. Overcharge and overdischarge will seriously affect the battery performance and life.
(3) Battery liquid hole plugs and vent caps should be kept clean, removed or opened when charging, and should be installed or closed after charging. Battery surface, connecting wires and screws should be kept clean and dry. If there is sulfuric acid, use cotton gauze dipped in lye to wipe away, pay attention not to let the lye into the battery.
(4) After charging is completed, the battery level should be checked, and distilled water should be added in time to maintain the liquid level. It is forbidden to add dilute sulfuric acid under normal circumstances.
(5) After the battery is used, it should be charged in time, and the time of placing is generally not more than 24 hours.
(6) Charging should be kept well ventilated, strictly prohibit smoke and fire.
c. There is a “backward battery” in the battery group (backward battery refers to the charging and discharging process voltage value is lower than other batteries or due to fault repair of the battery), the equalization of charging is only backward battery alone.
Repeat according to article b several times until the charger is closed, there are bubbles in the battery until the intense occurrence.
(9) When the battery is not in use, the storage period of one month shall be in accordance with the ordinary charging method for a supplemental power.
(11) Avoid contact with any liquid and harmful substances, and any metal impurities shall not fall into the battery.
2. Technical performance and applicability: package cycle life, charge/discharge multiplier, high and low temperature performance, and so on. Different brands may differ in technology routes, some choose to focus more on lithium iron phosphate technology, while other brands may choose lithium titanate technology, depending on the specific application scenarios and technical requirements of the forklift.
3. Battery consistency: Battery consistency is critical to ensure the performance and life of the battery pack. The consistency of voltage, internal resistance, capacity and other parameters between battery cells to ensure the stability and durability of the battery pack.
4. Li-ion Battery Management System (BMS): Intelligent BMS is essential to protect the battery from damage such as overcharging, over-discharging, high temperature, etc. The BMS is able to monitor the status of the battery in real time, and then protect it to prolong the service life of the battery.
5. Cost and cost-effective: consider the cost and cost-effective. Different brands of 12V lithium batteries may vary in price, according to your budget and needs, choose the cost-effective products.
6. The strength of technological innovation, the strength of the manufacturers will continue to technology research, product stability and quality will be further enhanced.
Our excellent sales and technical team help your business find the best Rol rate
E-Mail: inquiry@fentbattery.com
Address: No.3, Dongli Road, Xili, Dongyong Town, Nansha District, Guangzhou City, China
0086 20 3901-1403Copyright:Guangzhou Battsys Co.ltd
